Getting Started
- To wake the screen, tap the Cisco touch panel located on the wall, near the teaching podium to turn on the display.
Using the Classroom PC
- On the Cisco touch panel, tap Share screen located under Classroom PC.
Using a Laptop (HDMI)
- Plug the proper display cable (located on the podium) into your laptop.
- On the Cisco touch panel, tap Share screen.
- To mirror the laptop screen onto both classroom displays, tap Preview under the Laptop (HDMI) source.
- To mirror both the classroom PC and laptop display, tap Preview under the Classroom PC source and the Laptop (HMDI) source.
Wireless Screen Sharing
Wireless screen sharing can be used from any computer or mobile device. This can be done by sharing from the Webex app or by visiting share.webex.com and then entering the code provided on the Control Panel located in the room.
Audio Settings
If the audio isn't projecting through the classroom, ensure the proper output is selected and the volume is adequate.
- Click the sound icon, located in the bottom right corner of the computer screen.
- In the Select playback device menu, the Codec option should be selected.
- The volume can be adjusted from the computer or the Cisco touch panel.
Powering Down
- Stop sharing:
- On the Cisco touch panel, tap Share screen.
- Tap Stop Preview.
- Powering down:
- Tap the room name, located in the top left corner of the Cisco touch panel.
- Tap Standby.
Troubleshooting
- Digital Whiteboard will not power on and power light isn’t lit.
- Ensure the power cable is plugged into a working power outlet.
- Displays are not turning on:
- On the Cisco touch panel, tap the room name located in the top left corner.
- Tap Settings.
- Tap Restart.
- Adjusting the display volume:
- On the Cisco touch panel, press and hold the left volume button to decrease and the right button to increase the volume.
- Restart the computer if there are additional issues.
- If further assistance is needed, contact the Help Desk at 910.521.6260 or helpdesk@uncp.edu.
