Getting Started

• To wake the screen, tap the Cisco touch panel located on the wall, near the teaching podium to turn on the display.

Using the Classroom PC

• On the Cisco touch panel, tap Share located under Classroom PC.

Using a Laptop (HDMI)

• Plug proper display cable, located on the podium, into your laptop.
• On the Cisco touch panel, tap Share.

Audio Settings

If the audio isn't projecting through the classroom, ensure the proper output is selected and the volume is adequate.

• Click the sound icon, located in the bottom right corner of the computer screen.
• In the Select playback device menu, the Codec option should be selected.
• The volume can be adjusted from the computer or the Cisco touch panel.

Powering Down

• To stop sharing:
  • On the Cisco touch panel, tap Share.
  • Tap Stop Sharing.
• To power down:
  • Select the room name located in the top left corner of the screen.
  • Select Standby.

Troubleshooting

• Display is not turning on:
  • On the Cisco touch panel, tap the room name located in the top left corner.
  • Tap Settings.
  • Tap Restart.
• Adjusting the display volume:
  • On the Cisco touch panel, press and hold the left volume button to decrease and the right button to increase the volume.
• Restart the computer if there are any additional issues.
• If further assistance is needed, contact the Help Desk at 910.521.6260 or helpdesk@uncp.edu.